I was sanding the fairing compound I had smeared on the hull last night and dropped the hull. Damn now there would be damage to fix! The saw horse legs I have been using snapped the attachment points to the strongback causing the hull to fall away from me and land on my chop saw and the corner of a 2x4. I expected it to be bad. In the end all that happened seems to be one seem split about 4 inches and the 2x4 dented. Bamboo is hard stuff even when it's less than 3/16 thick. Fortuitously the hull is now on its side raised on other saw horses so I'm working one side at a time.